搜索
搜索

成为您的骄傲—捷力特工具

简体 English
返回

新闻中心

资讯分类
/
/
/
合金钻头材料总结

合金钻头材料总结

  • 分类:公司新闻
  • 作者:
  • 来源:
  • 发布时间:2021-11-25 08:58
  • 访问量:

【概要描述】The main component of the alloy drill bit is tungsten carbide, cobalt, and the like. The alloy drill bit generally refers to a hard alloy drill bit, a score, welded, an invertable blade, and a replaceable head. The main ingredient of the cemented carbide is tungsten carbide, cobalt, etc., the hardness is high, which is generally higher than HRC90 degrees, and is more applicable in bulk processing and difficulty in hard work. The alloy drill bit in the market is generally the overall drill bit of tungsten steel, and the high-quality alloy drill bit will take coating treatment, such as aluminum nitride chromium (AlCrn) coating, the coating is a single layer coating, thickness 4 μm, Micro-hardness is 3200HV, the friction coefficient of 0.35, and the thermal stability is 00 degrees Celsius. After the coating, the drill bit is yellow on gray. After coating, alloy drills can process low alloy steel and high strength steel. High hard steel can reach 54 hrc.

合金钻头材料总结

【概要描述】The main component of the alloy drill bit is tungsten carbide, cobalt, and the like. The alloy drill bit generally refers to a hard alloy drill bit, a score, welded, an invertable blade, and a replaceable head. The main ingredient of the cemented carbide is tungsten carbide, cobalt, etc., the hardness is high, which is generally higher than HRC90 degrees, and is more applicable in bulk processing and difficulty in hard work.



The alloy drill bit in the market is generally the overall drill bit of tungsten steel, and the high-quality alloy drill bit will take coating treatment, such as aluminum nitride chromium (AlCrn) coating, the coating is a single layer coating, thickness 4 μm, Micro-hardness is 3200HV, the friction coefficient of 0.35, and the thermal stability is 00 degrees Celsius. After the coating, the drill bit is yellow on gray. After coating, alloy drills can process low alloy steel and high strength steel. High hard steel can reach 54 hrc.

  • 分类:公司新闻
  • 作者:
  • 来源:
  • 发布时间:2021-11-25 08:58
  • 访问量:

合金钻头的主要成分是碳化钨、钴等。 合金钻头一般是指硬质合金钻头、刻痕、焊接、可倒转刀片、可更换头部。 硬质合金的主要成分是碳化钨、钴等,硬度高,一般高于HRC90度,更适用于大块加工,难加工。

市场上的合金钻头一般为钨钢整体钻头,合金钻头会进行镀层处理,如氮化铝铬(AlCrn)镀层,镀层为单层镀层,厚度4 μm,显微硬度为3200HV,摩擦系数为0.35,热稳定性为00摄氏度。 涂层后,钻头呈灰底黄。 涂层后合金钻头可加工低合金钢和高强度钢。 高硬钢可以达到54 hrc。

关键词:

Related News

干货分享,一分钟带你了解液压拉马的原理
  新型液压拉马方便省力,三爪式和两爪式可根据现场工作需要拆卸更换。它可以自由旋转,推动柱塞远离活塞中心点,快速接触被拉工件的中心点,可选泵。
查看详情 白箭头 黑箭头
液压拉马的基本简介?
液压拉马的我们在生活中当然也是很常见的。因为它的优点是比较突出的,所以选择使用它的人也是比较多的。今天也借助这个机会为大家来介绍一下它的优点吧?想知道的话就赶紧来看看吧。
查看详情 白箭头 黑箭头
液压拉马的使用方法?
液压拉马在使用之前我们需要了解的知识点还是比较多的,对于这些基本的问题可能很多用户还是不清楚的。下面就为大家来讲述一下主要注意事项?想知道的话就赶紧来看看吧,希望可以为你带来帮助。
查看详情 白箭头 黑箭头
上一页
1
2
...
9

0576-81758818

在线时间:09:30-05:30

联系人

林小姐 18858647878

jielite

地址: 浙江.玉环.芦浦镇漩门工业城.凤屿西路26号

jielite

电话:0576-81758818

jielite

邮箱:mail@jielitetools.net

 

这是描述信息
找到我们
© 2021 玉环捷力特工具有限公司 浙ICP备2021035046号 网站建设:中企动力台州